All vehicles need headlights to guide them when it’s dark or when it’s foggy. Headlights are absolutely essential, as anyone who drives or owns a vehicle will know. Whatever the weather, they’re a valued necessity.
Sometimes though when the conditions are particularly bad it can be worth having a greater light source such as an LED light bar to help make your driving experience better, particularly if you enjoy off-roading and the streets aren’t already lit.
Please note that we participate in a number of affiliate programs, including Amazon, and earn from qualifying purchases. For more information, visit our Legal page.
Night riding will be so much easier with the help of an ATV light bar, and you won’t need to worry about any nasty bumps into things you can’t see. The problem is with so many products on the market it can sometimes be a bit of a challenge to select the right product for you.
We’re here to help!
We’ve saved you hours of scouring the internet by creating this helpful ranking the best ATV LED light bars out there. Oh yeah, and we’ve also made a neat buyer’s guide to help you know what you’re looking out for as well as a FAQs section.
In a hurry? This ATV LED light bar will light up your world!
In a hurry? This is Our Winner!
Best ATV Light Bar – Comparison Table
Best ATV Light Bar – Reviews
Best ATV Light Bar – Buyer’s Guide
While it may seem difficult now to choose the right ATV Light Bar, it’s super simple once you know what you’re looking for. There are a lot of different makes and models out there and you can select from a whole range of wattage and lumens.
Ultimately, what you choose will come down to personal preference and what you need. You need to keep in mind where you’re likely to and how you’re likely to drive your ATV and then purchase based on that.
For instance, you can’t justify a large heat sink due to the extra weight when you’re in a colder environment. Smaller and more sturdy pods tend to be more suited to stronger bumps and vibrations if you’re moving quite fast through more rough terrain.
Read on below to see some of our suggestions when it comes to buying an ATV Light Bar.
Firstly, there are full-sized bars. These are usually the types of ATV light bars that can also work well with things like trucks and SUVs, and they provide a lot of functionality on other terrains like highways and roads. This is generally because these types of LED ATV light bards tend to have a lot of little individual LEDs for both the flood and spot beams. These are particularly useful if you’re going to be using your ATV light bar for farm work. They’re possibly a little bit too heavy to use for more bumpy, demanding off-road tracks.
Alternatively, you have LED minis. These are basically smaller versions of the full-sized bar. More often than not they come as two bars or more, and they have a good balance between their size and the brightness they offer. They tend to be big enough to fit a range of different LEDs.
LED lamps tend to be much smaller and you can usually fit them to swivels to provide an easy to focus spotlight. You can also get an LED pod which is a little similar, but this only provides floodlights. This can be quite handy if you’re only planning on using the ATV on more difficult terrain.
You can also use amber LED lights, mainly for use in fog. You can get these as secondary units too in addition to a regular bar because they don’t give incredibly effective light during the darker hours of the day.
You can choose from spotlights or floodlights. Usually, the better ATV light bars tend to combine both of these different types. Usually, the spotlights can reach quite far away, but they don’t cover a lot of area. Because ATVs are usually quite slow-moving on more winding trails they’re not really as helpful as floodlights are, as floodlights will make a short beam that’s quite wide.
Of course, all of this depends on where you’re using them. Spotlights can sometimes be a requirement on public roads and if you’re a rancher they can be very useful, or even if you’re in a desert. If you combine both, the spots will cover the central area, and the floodlights will back them up. Hence it’s better to have a combination of both.
LED ATV lights may not be able to withstand water damage with nothing but a rain protection factor. Because of this, you should seek LED lights that have a waterproof rating of IP67 so you can even get submerged in the water up to 3.3 feet and they won’t get damaged. If you’re crossing a lot of creeks this is especially important.
Interestingly enough, the water-resistance factor will also alert you to how much dust protection the device has. This can give you some decent guidelines as to whether they’re suitable to use in a desert environment or if you can use them on the beach.
Usually, the container for the lights is made of cast or extruded aluminum. This can also be anodized to stop it from wearing away after a lot of use. The mounts for the lights will need a more tough metal, like steel for instance. It’s vital that the mounts are free of rust because they are made to pivot. You can best achieve this by adding nickel or chromium into the steel construction.
Brightness can often depend on the manufacturer. Through the years light bulbs have greatly evolved, and you can usually see that by how much the wattage and illumination have improved. For the most part, if you’re talking about light then you’re talking about lumens too. Lumens are a measurement of how much light you’ll find in the bulb. As a rule the more lumens you get the brighter the beam will be.
You will require more light when you’re off-road, and the brighter beams should cut through rain and fog with no problem. With that in mind, try to ensure that the light bar you buy has a decent amount of lumens.
Dissipation of Heat
Too much heat can really affect the lifespan of your LED lights. With that being said, you should try to use manufacturers that have heat sinks made of conductive metal so that the frame will stay cool. Sinks that are a lot bigger tend to have ridges and patterns that are quite similar to the ones you may find on a laptop or desktop computer, and these can help to extend the lifespan to over more than 30,000 hours.
If weight isn’t too much of a problem, then this is definitely a good investment.
Temperature of the Light
Light temperature isn’t necessarily linked to heat, despite what you may think. It comes down to the warmth the color appears to the human eye. As a rule, a decent reference point is how hot the daylight is on a more sunny day. This is 5000K.
This can make an area that’s lit artificially appear to look natural to the human eye but most LED light bar manufacturers don’t like this. Cooler hues that have a light temperature of 6000K tend to look much brighter and they provide a clearer image.
Cooler lights that have more or a blue tint can make the retina of the eye tired after a couple of hours so if you’d rather a more comfortable light it may be best to avoid this falsified brightness.
This question is a pretty important one when it comes to purchasing an LED light bar. The use of a light bar is affected a lot by its shape. ATV light bars usually come in two different shapes – it’s usually either curved or straight.
Some of the smaller lights tend to be a bit more rounded or rectangular, but they’re usually not in the same league. Mostly the straighter bars are cheaper and these are made to make the light shine directly ahead of you.
Curved bars will give more vision to the areas all around you rather than only directly ahead. This is particularly helpful for if you end up going off-road.
How do I install my LED light bar on my ATV?
Ideally, you need the right tools and the right knowledge to install a light bar. Here are some rules to follow:
Ensure that your ATV light is completely free of any grime or dust. Just clean it over before you try to install it.
Drill some holes into the front of the device so you can mount it. Some will already come with holes drilled in so you won’t need to worry about this so much.
Attached the mounting brackets to the ATV using your first lot of screws. Don’t attach the stud mounts to any plastic as the vibrations from the vehicle will cause cracks to form around the hole.
Use your second set of screws to put the bar in place onto the brackets. Ensure that the screws are very secure and that they can carry the weight of the bar. Don’t tighten them too much and make sure that you’ve mounted the bar correctly. Before setting off, ensure that everything is properly mounted and you don’t have anything out of place or loose.
If you haven’t seen anything you like or you’re on a tight budget and would prefer to buy used, we always recommend checking Ebay!Check Ebay
See what other people are saying…